砂浆试块抗压能力检测数据

数据用途和场景：砂浆试块抗压能力检测能够反应各个项目中各部位砂浆试块承受压力是否符合规范，在试块质量上进行把控，对相关工程的安全性上具有积极意义。砂浆试块抗压强度按如下公式计算：σ=P/S*1.35；σ为抗压强度，单位为MPa；P为破坏载荷，单位为kN；S为受压面积，单位为mm2,；1.35为计算中的换算系数，将以上数据按照JGJ/T 70-2009标准要求计算后，计算后与标准的性能指标对比判断是否合格。

Data Purpose and Application Scenarios: The compressive strength test of mortar test blocks can reflect whether the pressure-bearing capacity of mortar test blocks at various positions in different construction projects meets the specification requirements, control the quality of the test blocks, and exert positive effects on the safety of relevant engineering projects.
The compressive strength of mortar test blocks is calculated via the following formula:
σ = P/S × 1.35
Where:
σ refers to the compressive strength, with the unit of megapascals (MPa);
P refers to the failure load, with the unit of kilonewtons (kN);
S refers to the compressive bearing area, with the unit of square millimeters (mm²);
1.35 is the conversion coefficient applied in the calculation.
After performing the calculation in accordance with the requirements specified in the JGJ/T 70-2009 standard, the calculated results shall be compared with the standard performance indicators to judge whether the mortar test blocks are qualified.

搜集汇总

数据集介绍

特点

该数据集包含101条砂浆试块抗压能力检测数据，每月更新，用于检测砂浆试块的抗压能力，确保工程安全性。数据基于JGJ/T 70-2009标准计算抗压强度，并判断是否合格。