Utah FORGE: Well 16B(78)-32 Drilling Data
收藏资源简介：
This drilling data for Utah FORGE well 16B(78)-32 include a well survey, core summary, mud and mud temperature logs, daily reports of the drilling process, and additional data from the Pason oil and gas company. Well 16B(78)-32 serves as the production well for reservoir creation, fluid circulation, and demonstration of heat extraction for the FORGE project. It has been drilled as a doublet approximately 300 feet parallel to and above the injection well 16A(78)-32. The proposed total depth was 10,658 feet, which was exceeded. Spudding began on April 26th, 2023. As of June 20th, 2023, the total depth measured 10,947 feet and the vertical depth measured 8,357 feet. Drilling included the trial use of insulated drill pipe (IDP) from Eavor Technologies, which was considered a success. IDP restricts counter-current heat transfer between drilling fluid inside the drill string and hotter returning fluid in the annulus, thereby ensuring the bottomhole assembly (BHA) remains submerged in cool fluid. Eavor rented 350 joints of IDP to FORGE which were run in two consecutive BHAs at the well. The results of this trial are included here.
本数据集涵盖犹他FORGE地热项目16B(78)-32井的全套钻井数据，包含井眼测量报告、岩心概要、泥浆及泥浆温度测井曲线、钻井过程每日日志，以及帕森石油天然气公司（Pason Oil and Gas Company）提供的补充数据。16B(78)-32井为FORGE项目的生产井，用于储层构建、流体循环及地热取热演示。该井为双井组配置井，与注入井16A(78)-32平行布设且位于其上方约300英尺处。原设计总钻井深度为10658英尺，实际钻进深度超出该值。该井于2023年4月26日开钻，截至2023年6月20日，实测总深度达10947英尺，垂深为8357英尺。本次钻井过程中试验性使用了来自Eavor Technologies公司的隔热钻杆（Insulated Drill Pipe，IDP），试验取得圆满成功。该型钻杆可限制钻柱内钻井液与环空内高温返出流体之间的逆流换热，从而确保井底钻具组合（Bottomhole Assembly，BHA）始终处于低温钻井液的浸泡环境中。Eavor Technologies公司向FORGE项目租赁了350根该型隔热钻杆，该批钻杆先后被下入该井的两套连续井底钻具组合中。本次试验的相关结果已收录于本数据集内。
