Microplastics in sea surface waters in the Southern Bight of the North Sea in 2022
收藏资源简介:
This dataset contains 1 csv file. The dataset contains data of floating microplastic abundances including meso and macro plastics at different locations collected in the North Sea during environmental surveys on the RV Endeavour, in 2022. Microplastic abundances were reported per unit area (km-2). A flowmeter attached to the bottom of the Neuston Microplastic Catamaran trawl was used to estimate the volume of water sampled. The volume sampled was estimated following Russel and Webster (2021) (Microplastics in sea surface waters around Scotland - ScienceDirect). Form and polymer type of all three size classes (micro, meso and macroplastics) are also provided. The reporting of microlitter in surface water was done according to the recent Guidance on Monitoring of Marine Litter in European Seas (https://publications.jrc.ec.europa.eu/repository/handle/JRC133594). Microlitter types and polymer types was reported according to EMODnet. This work is part of the floating microplastic monitoring commitments Cefas has set itself. The assessment of microplastics in surface waters is used for a potential OSPAR indicator development. Samples were collected using a Microplastic Catamaran in the Southern Bight of the North Sea. In the lab larger items were removed from the sample for imaging and ATR-FTIR (Attenuated Total Reflectance Fourier Transform Infrared spectroscopic) analysis. 400 ml of 30% KOH:NaClO were added and then incubated for 24 h at 40 C. Samples were settled for 1 h before filtration onto GF/D filters. Suspected particles were identified and polymer identification was carried out using a LUMOS II micro-ATR-FTIR. Spectra were collected in absorbance mode in the range 4000 - 500 cm-1 at a resolution of 4 cm-1. Polymer identification was verified based on the percentage match against provided polymer libraries. Only matches above 60% were selected for polymer identification.
本数据集包含1个逗号分隔值(CSV)文件,收录了2022年依托奋进号(RV Endeavour)研究船在北海开展环境调查期间,于不同采样点位获取的漂浮微塑料丰度数据,涵盖微型、中型与大型塑料样本。微塑料丰度以每平方千米(km⁻²)为单位进行统计报告。 漂浮生物微塑料双体船拖网底部加装的流量计被用于估算采样水体体积,采样水体体积的估算参照Russel与Webster(2021)发表于ScienceDirect的《苏格兰周边海域表层水中的微塑料》一文方法执行。 本数据集同时提供了三个尺寸级别(微型、中型、大型塑料)的样本形态与聚合物类型信息。表层水微碎屑的报告规范遵循最新版《欧洲海域海洋碎屑监测指南》(https://publications.jrc.ec.europa.eu/repository/handle/JRC133594),微碎屑类型与聚合物类型的分类标准参照欧洲海洋观测与数据网络(EMODnet)制定的规范。 本研究隶属于英国环境、渔业与水产养殖科学中心(Cefas)既定的漂浮微塑料监测工作任务,本次表层水中微塑料的评估工作,可为东北大西洋海洋环境保护委员会(OSPAR)潜在的指标体系开发提供支撑。 研究样本通过微塑料双体船在北海南部海域采集获取。实验室处理阶段,研究人员先从采集样本中剔除较大粒径杂质,用于后续成像与衰减全反射傅里叶变换红外光谱(ATR-FTIR)分析。向样本中加入400毫升30%的氢氧化钾-次氯酸钠(KOH:NaClO)混合液,随后置于40℃环境下孵育24小时。样本静置1小时后,通过GF/D滤膜进行过滤。 对疑似微塑料颗粒物进行识别,并采用LUMOS II型微区衰减全反射傅里叶变换红外光谱仪完成聚合物类型鉴定。光谱采集采用吸光度模式,扫描范围为4000~500 cm⁻¹,分辨率为4 cm⁻¹。聚合物类型鉴定结果通过与预设聚合物谱库的匹配度进行验证,仅保留匹配度高于60%的鉴定结果。




