曳引驱动乘客电梯定期检验收费计算数据
收藏资源简介：
曳引驱动乘客电梯定期检验收费计算是根据电梯的具体情况，包括电梯的额定载重量、额定速度、层/站/门数等因素，来确定检验费用的金额。它能够为电梯使用单位提供合理的收费依据，为电梯检验机构提供方便准确的收费标准。1、数据采集：收集电梯额定载重量、额定速度、电梯层/站/门数、检验种类等参数。2、数据处理：首先根据额定速度v≤1，vx=0；1＜v≤1.75，vx=0.1；1.75＜v≤2.5，vx=0.15；v＞2.5,vx=2确定额定速度系数。根据额定载重量t≤1000，tx=0;1000＜t≤2000，tx=0.1;t＞2000，tx=0.15确定额定载重量系数。3、套用算法公式计算：曳引驱动乘客电梯定期检验收费实收金额=（收费标准*（1+额定载重量系数+额定速度系数）+（【层/站/门三个参数中的最大值】-5）*50）*检验种类，其中，【层/站/门三个参数中的最大值】 如果三个参数最大值小于5则按5算。定期检验的检验种类参数为1。
The periodic inspection fee calculation for traction-driven passenger elevators is determined based on specific elevator conditions, including factors such as rated load capacity, rated speed, and the number of floors, stations and doors. This calculation method can provide a reasonable charging basis for elevator using units and a convenient and accurate charging standard for elevator inspection institutions. 1. Data Collection: Collect parameters including elevator rated load capacity, rated speed, number of floors/stations/doors, and inspection type. 2. Data Processing: First, determine the rated speed coefficient according to the following rules: - When rated speed (v leq 1), (v_x = 0); - When (1 < v leq 1.75), (v_x = 0.1); - When (1.75 < v leq 2.5), (v_x = 0.15); - When (v > 2.5), (v_x = 2). Then determine the rated load coefficient in accordance with the following rules: - When rated load (t leq 1000), (t_x = 0); - When (1000 < t leq 2000), (t_x = 0.1); - When (t > 2000), (t_x = 0.15). 3. Apply the algorithm formula for calculation: The actual received periodic inspection fee for traction-driven passenger elevators = (charging standard × (1 + rated load coefficient + rated speed coefficient) + (max(floors, stations, doors) - 5) × 50) × inspection type. Note: If the maximum value among the three parameters of floors, stations and doors is less than 5, it shall be calculated as 5. The inspection type parameter for periodic inspection is 1.
