Figure 6 "Rapid fabrication of reinforced and cell-laden vascular grafts structurally inspired by human coronary arteries"
收藏资源简介：
This data set corresponds to the raw data displayed as graphs in figure 6 of the paper entitled "<b>Rapid fabrication of reinforced and cell-laden vascular grafts structurally inspired by human coronary arteries". </b>The excel file contains 5 sheets. The first sheet contains the longitudinal stress-strain data collected for 5 replicates of fabricated small diameter vascular grafts (SDVGs) and displayed as an average graph in figure 6a. The second sheet contains the circumferential stress-strain data collected for 5 replicates of fabricated SDVGs and displayed as an average graph in figure 6b. The third, fourth and fifth sheet contain different data of diameter change ratio (D/D<sub>0</sub>) as function of luminal pressure applied to 5 replicates of fabricated SDVG. SDVG replicates mounted on the pressurized system were pre-stretched longitudinally at 10, 20 and 25% strain and the average D/D<sub>0</sub> v/s luminal pressure displayed as graph in figure 6d, 6e and 6f, respectively.
